67
Getting Started
Installing additional memory (optional)
5.375 x 8.375 ver 2.3
2Pull the clips away from the memory module.
The memory module pops partially out of the slot.
Sample removing the memory module
3Carefully remove the module from the slot.
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its pin connector (on the side you insert into the
computer).
Avoid touching the connectors on the memory module or on
the computer. Grease or dust on the connectors may cause
memory access problems.
4Complete the procedure by following steps 4 through 8 in
“Installing additional memory (optional)” on page 62.