Toshiba B-850 manual Position Fine Adjust Command ESC AX

6.3.2 Position Fine Adjust Command [ESC] AX

Function

Format

Term

cAdjusts the feed value so that the label shifts forward or backward from the automatically set first print start position.

dAdjusts the cut position so that the label will be cut at a position shifted forward or backward from the automatically set cut position, or adjusts the stop position of the strip issue so that the label shifts forward or backward from the automatically set stop position of the strip issue.

eAdjusts the value for feeding the label back to the home position after cutting, or adjusts the value for feeding the label back to the home position from the stop position of the strip issue.

[ESC] AX; abbb, cddd, eff [LF] [NUL]

a:Indicates the direction, forward or backward, in which a fine adjustment is to be made.

+: Backward

-: Forward

bbb:Feed length fine adjustment value 000 to 500 (in 0.1 mm units)

c:Indicates the direction, forward or backward, in which a cut position (or stop position of the strip issue) fine adjustment is to be made.

+: Backward

-: Forward

ddd:Amount for finely adjusting the cut position (or stop position of the strip issue). 000 to 500 (in 0.1 mm units)

e:Indicates whether the back feed length is to be increased or decreased. +: Increase

-: Decrease

ff:Amount for finely adjusting the back feed. 00 to 99 (in 0.1 mm units)

- 36 -