Manuals / Brands / Computer Equipment / Laptop / Toshiba / Computer Equipment / Laptop

Toshiba C650D DC IN/Battery Indicator, LED, LED, LED, off, amber, exhausted, installed, not light, • Operates, • Operates, No battery, trigger point, trigger point, Power

1 170

Download 170 pages, 3.23 Mb

Satellite C650/C650D, Satellite Pro C650/C650D

		Power on	Power off
			(no operation)
AC adaptor not	Battery charge is	• Operates
connected	above low battery	• DC IN/Battery LED:
	trigger point	amber
		amber

	Battery charge is	• Operates
	below low battery	• DC IN/Battery LED:
	trigger point	• DC IN/Battery LED:
	trigger point	blinking amber
		blinking amber

	Battery charge is	Computer goes into
	exhausted	hibernation or shuts down
		(depending on the
		TOSHIBA power
		Management Utility Setting)
	No battery	• No operation
	installed	• DC IN/Battery LED:
		off

System Indicators

The DC IN/Battery and Power indicators on the system indicator panel alert you to the computer’s operating capability and battery charge status.

DC IN/Battery Indicator

Check the DC IN/Battery indicator to determine the status of the battery pack- the following indicator conditions should be noted:

	Blinking amber	Indicates battery charge is below low battery
		trigger point

	Amber	Indicates the AC adaptor is connected and
		charging the battery.

	Green	Indicates the AC adaptor is connected or the
	Green	battery is fully charged.
		battery is fully charged.

	No light	Under any other conditions, the indicator does
	No light	not light.
		not light.

If the battery becomes too hot while it is being charged, the charge will stop and the DC IN/Battery indicator will go out. When the battery’s temperature falls to a normal range, charge will resume. This event occurs regardless of whether the power to the computer is on or off.

6-2	User’s Manual

Contents

Page Table of Contents Preface General Precautions Chapter 1 Getting Started Chapter 2 The Grand Tour Chapter 4 Operating Basics Chapter 5 The Keyboard Chapter 6 Power and Power-upModes Chapter 7 HW Setup and Passwords Chapter 8 Troubleshooting Appendix A Specifications Appendix B Display Controller and Video Mode Appendix C Wireless LAN Appendix D AC Power Cord and Connectors Appendix E Legal Footnotes Page When Using Your Computer ■When setting up the computer for work, place it on a level surface http://epps.toshiba-teg.com CE compliance ■Only CE marked options should be connected/implemented ■Only best shielded cables should be connected Working environment Industrial Environments (e.g. environments where a mains voltage of 380 ■Medical Environments ■Automotive Environments ■Aircraft Environments Disposal of Products http://eu.computers.toshiba-europe.com Disposal of Batteries and/or Accumulators Disposing of the Computer and the Computer’s Batteries REACH - Compliance Statement www.toshiba-europe.com/computers/info/reach Following information is only for Turkey GOST Visit http://www.eu-energystar.org http://www.energystar.gov for more information regarding the ENERGY STAR Program The drive has one of the following labels: DVD Super Multi (±R DL) Drive Panasonic System Networks UJ890AD/UJ890ED Toshiba Samsung Storage Technology TS-L633C/TS-L633Y Hitachi-LGData Storage GT30N/GT30F TEAC DV-W28S-V Preface Keys ENTER Key Operation CTRL + C CTRL General Precautions ■Extreme heat, cold, or humidity ■Liquids and corrosive chemicals Instruction Manual for Safety and Comfort Getting Started Windows Page ■Do not use a 3-pinto 2-pinconversion plug DC IN/Battery Page Power Software License Terms Shut Down Mode Optical Disc Drive Shut down Benefits of Sleep Mode Executing Sleep Mode Sleep Mode limitations Benefits of Hibernation Mode Starting Hibernation Mode Automatic Hibernation Mode Data Save in Hibernation Mode Certain conditions require that you reset the computer, for example, if: System Recovery Options Windows Help and Support Startup Repair The System Recovery Options can also be run manually to repair problems 1.Turn off the computer Creating Recovery Media This section describes how to create Recovery Media ■Be sure to connect the AC adaptor when you create Recovery Media Be sure to close all other software programs except the Recovery Media Creator ■Operate the computer at full power Restoring the pre-installedsoftware from the Recovery hard disk drive FN + ESC 1.Turn off your computer 2.While holding down 0 (zero) key on the keyboard, turn on your computer A menu will be displayed from which you should follow the Ordering Recovery Discs from TOSHIBA Page The Grand Tour External monitor port Fan vent Security lock slot LAN jack Headphone jack Microphone jack Universal serial bus (USB 2.0) ports Optical disc drive DC IN Battery pack Battery pack lock Battery release latch Memory module cover Web camera LED Built-in microphone Power button Stereo speaker System indicators Web camera Page CAPS LOCK NUM LOCK DVD CDs DVDs DVD Super Multi (± R DL) Drive DVD read DVD-Rwrite DVD-RWwrite DVD+R write ■Depending on the model in question, either a 2-pinor 3-pinadaptor power lead will be bundled with the computer Hardware, Utilities and Options Memory*2 Slots Video RAM*6 Disks Hard Disk Drive DVD Super Multi Some models are equipped with a full-sizeDVD (±R DL) Drive ■DVD-ROM ■DVD-Video ■DVD-R Display Power Saving Technology AMD® Vari-Bright™ Keyboard Pointing Device Ports Headphone Microphone Multimedia Sound system Communications LAN Wireless LAN*7 Page Page Page Page Page Page Cards/Memory ■Memory expansion Power Devices ■Additional battery pack (3 cell and 6 cell) ■Additional AC adaptor Points to Note About the SD/SDHC/SDXC Memory Card Memory Media Format Formatting an SD/SDHC/SDXC Memory Card Card Care Memory Card Care About the Write-protect Removing a Memory Media open the icon on the system tray and disable the inserted memory card 2.Grasp the card and remove it Installing Memory Module 7.Push the module down so that it lies flat and is secured by two latches 8.Seat the cover and secure it with one screw Removing Memory Module To remove the memory module, make sure the computer is in boot mode then: 1.Turn the computer off and remove all cables connected to the computer Turn the computer upside down and remove the battery pack (refer to Chapter 6 3.Remove one screw securing the memory module cover connecting the monitor cable 1.Turn the computer’s power off 2.Connect the monitor cable to the external monitor port 3.Turn the external monitor’s power on 4.Turn the computer’s power on Connecting the security lock Operating Basics Page Using TOSHIBA Web Camera Application Web Camera Application Capture Settings Camera Resolution Capture Still Image Note on Use Disclaimer How to Register The Face Recognition Data To launch this utility, click Face Recognition The Registration 1:N Mode Login Screen 1:1 Mode Login Screen Loading Discs Please follow the steps below and refer to figures 1.a. When the power is on, press the eject button to open the drawer slightly Page Removing Discs Important Message (DVD Super Multi (±R DL) Drive) Before Writing or Rewriting Page DVD+RW: MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2.4x, 4x and 8x speed media) DVD-RAM: The actual number of rewrites to There are two types of We can support only format 1 of When Writing or Rewriting ■Do not perform any of the following actions: ■Change users in the Windows 7 operating system ■Start a communication application such as Wireless LAN ■Apply impact or vibration to the PC Disclaimer (DVD Super Multi (±R DL) Drive) TOSHIBA does not bear responsibility for the following: ■Damage to any CD-R/-RWor Any change or loss of the recorded contents of ■Damage that may be caused by using third party equipment or software Data Verification Recording settings Data CD/DVD ■Select Settings for Each Mode -> Data CD/DVD in the Settings menu 2.Mark the Verify written data check box Notes on Use “TOSHIBA DVD PLAYER” software is supported for playback of Use The resume function cannot be used with some discs on the “TOSHIBA DVD PLAYER” It is recommended the AC adaptor be connected when playing Display Devices & Audio Appearance and Personalization Display Adjust resolution Advanced settings Starting TOSHIBA DVD PLAYER Use the following procedure to start “TOSHIBA DVD PLAYER“ Play DVD movie (using TOSHIBA DVD PLAYER) TOSHIBA DVD PLAYER CD/DVD 2.Do not bend the CD/DVD 5.Do not expose to direct sunlight, extreme heat or cold 6.Do not place heavy objects on your CD/DVD This section describes some of the audio control functions Volume Mixer Voice Effects Audio Director SmartEQ and 3D setting 1.Click on the Speakers button 3.To disable the selected profile, click on the OFF button Custom Night Mode Phantom Speakers Setting Security Connecting LAN Cable To connect the LAN cable, follow the steps below Disconnecting LAN Cable To disconnect the LAN cable, follow the steps below Page Page The Keyboard Some software may disable or interfere with soft-keyoperations Soft key settings are not restored by the Resume feature Hot Keys ESC Sound mute Pressing FN + ESC in a Windows environment turns sound on or off. When you press these hot Pressing FN + F3 switches the system to Sleep Mode Hibernate Hibernation Mode Output touchpad function Zoom SPACE resolution TOSHIBA zooming Pressing FN + 1 reduces the icon size on the FN Sticky Key F number This key activates the Windows Start menu This key has the same function as the secondary mouse button 1.Hold down ALT Page Power and Power-upModes AC adaptor not Battery charge is above low battery trigger point DC IN/Battery Indicator Blinking amber Indicates battery charge is below low battery Indicates the AC adaptor is connected and charging the battery Power Indicator and the computer is turned on Blinking green Indicates the power was turned off while the computer was in Sleep Mode Real Time Clock Battery The firmware has detected that a CMOS battery fail occurred. <F1> continue Safety Precautions Danger: Warning: Danger Warning Caution Note Procedures Time Battery Charging Notice Monitoring Battery Capacity Maximizing Battery Operating Time Retaining Data with Power off Retention Time Extending Battery Life DC IN/ Battery Removing The Battery Pack To remove a discharged battery, follow the steps as detailed below: 1.Save your work 2.Turn the computer’s power off. Make sure the Power indicator is off 3.Remove all cables connected to the computer Installing The Battery Pack Enter Current Password Windows Utilities Panel Power On/Off System Auto Off HW Setup and Passwords OK, Cancel and Apply General Setup Password User Password Owner String Boot Priority Boot Priority Options Keyboard Wake-upon Keyboard USB Legacy USB Support LAN Wake-upon LAN Built-inLAN Page Troubleshooting Analyzing The Problem Software diskette) may be damaged or the program might be corrupted. Try loading another copy of the software package, check the software documentation. These System Start-up When the computer does not start properly, check the following items: ■Self Test ■Power Sources ■Power-onPassword Overheating Power Down AC Power Battery Password Cannot enter Refer to the Password section in Chapter 7, HW password Setup and Passwords Hard Disk Drive DVD Super Multi(±R DL) Drive Diskette Drive Touchpad USB Mouse External Monitor Sound System USB Sleep/Hibernation LAN Recovery Media Before You Call Where to Write booklet or visit www.toshiba-europe.comon the Internet Specifications Page Display Controller and Video Mode Page Wireless LAN 2.4 GHz Band Channels Sets (Wireless IEEE 802.11 Revision B, G and N) Frequency Range 2400-2483.5MHz Channel ID 5 GHz Band Channels Sets (Wireless IEEE 802.11 Revision A and N) 5620*2 5640*2 5660*2 5680*2 5700*2 AC Power Cord and Connectors Europe: Outside of Europe: USA United Kingdom AustraliaEurope CanadaChina Legal Footnotes 64-BitComputing 64-bitprocessors are designed to take advantage of 32 and 64 bit computing ■64-bitOperating System ■64-bitCPU, Chipset and BIOS (Basic Input/Output System) ■64-bitDevice drivers Page Page If your computer is stolen TOSHIBA Theft Registration Glossary DVD+R DL: ECP: FDD: FIR: GB: WSXGA: wide super extended graphics array WSXGA+: wide super extended graphics array plus WUXGA: wide ultra extended graphics array WXGA: wide extended graphics array WXGA+: wide extended graphics array plus ASCII BIOS: bus: An interface for transmission of signals, data or electric power byte: cache memory: CD-ROM: character: chassis: chip: CMOS: controller: co-processor: CPS: CPU: CRT: Page execute: To interpret and execute an instruction Extended Capability Port: fast infrared: file: firmware: To physically connect one system or device to another to exchange information interrupt request: A signal that gives a component access to the processor I/O: I/O devices: IrDA 1.1: KB: See kilobyte keyboard: kilobyte (KB): level 2 cache: See cache cache output: The results of a computer operation. Output commonly indicates data PAL: parity: Page RGB: RJ11: A modular telephone jack RJ45: A modular LAN jack ROM: S-Video: Super-Video Page Index