112 Learning the Basics
Powering down the computer
5.375 x 8.375 ver 2.3
Sample system power mode settings
For more information about the Power Saver utility, see
“Power Saver” on page 243.
Starting again after Turn off
To start the computer up again, press the power button until
the on/off light changes to green.
Using Hibernation Mode
Hibernation mode shuts the computer down completely, but it
first saves the current mode of the computer to the hard disk.
Since Hibernation mode does not require power to maintain
the saved information, the system settings are retained
indefinitely. Restoring information from the hard disk takes
longer than restoring it from memory. When you start up
again, the computer runs a self-test, loads the operating
system, and then returns to the mode in which you left it.
NOTE