L500/L505/L500D/L505D

3.Click the OK button. If the character string you enter matches the registered password, the password option is reset and the display changes to:

Not registered

If they do not match, the following message appears. You must repeat step 1.

Incorrect Password!!!

If you enter the password incorrectly three times in a row, the computer will shut down.

You will not be able to access the password option in the HW Setup. In this case you must turn the power off and back on to retry the procedure.

4.Follow the same procedures described in the earlier section, Password, to set a new user password.

Display

This tab allows you to customize your computer’s display settings for either the internal LCD screen or for an external monitor.

Power On Display

Allows you to set the display to be used when the computer is booted.

Auto-Selected

If any external display is connected, the power on

 

display will be in external display only mode.

 

Otherwise it will be in LCD only mode.

 

 

System LCD only

Irrespective of external display connection, the

 

power on display will be in integrated LCD only

 

mode.

Boot Priority

Boot Priority Options

This option sets the priority for booting the computer. You can change the boot priority from the device list.

Button Setting

Function Button

This feature allows you to set conditions for the Power Button and/or the other buttons.

Enabled

Enables the function button

 

 

Disabled

Disables the function button

 

 

User’s Manual

7-3