L500/L505/L500D/L505D

Display automatic

This feature automatically cuts off power to the

power off *

computer’s display panel when there is no

 

keyboard input for a specified time, with power

 

being restored the next time a key is pressed.

 

This can be specified in the Power Options.

 

 

HDD automatic

This feature automatically cuts off power to the

power off *

hard disk drive when it is not accessed for a

 

specified time, with power being restored when

 

the hard disk drive is next accessed. This can be

 

specified in the Power Options.

 

 

System automatic

This feature automatically shuts down the system

Sleep/Hibernation

into either Sleep Mode or Hibernation Mode when

Mode *

there is no input or hardware access for a

 

specified time. This can be specified in the Power

 

Options.

 

 

Power on password

Two levels of password security, supervisor and

 

user, are available to prevent unauthorized

 

access to your computer.

 

 

Instant security

A specific hot key function automatically locks the

 

system providing data security.

 

 

Intelligent power

A microprocessor in the computer’s intelligent

supply *

power supply detects the battery’s charge,

 

automatically calculates the remaining battery

 

capacity and protects electronic components

 

from abnormal conditions such as a voltage

 

overload from the AC adaptor. This can be

 

specified in the Power Options.

 

 

Battery save mode *

This feature lets you configure the computer in

 

order to save battery power. This can be

 

specified in the Power Options.

 

 

Low battery

When battery power is exhausted to the point that

automatic

computer operation cannot be continued, the

Hibernation Mode *

system automatically enters Hibernation Mode

 

and shuts itself down. This can be specified in the

 

Power Options.

 

 

Heat dispersal *

To protect against overheating, the processor has

 

an internal temperature sensor so that, if the

 

computer’s internal temperature rises to a certain

 

level, the cooling fan is turned on or the

 

processing speed is lowered. This can be

 

specified in the Power Options.

 

 

1-10

User’s Manual