Toshiba L630, L635 Working environment, ■Medical Environments, ■Aircraft Environments, ■Automotive Environments

L630/L635

Working environment

This product was designed to fulfil the EMC (Electromagnetic Compatibility) requirements to be observed for so-called “Residential, commercial and light industry environments”. TOSHIBA do not approve the use of this product in working environments other than the above mentioned “Residential, commercial and light industry environments”.For example, the following environments are not approved:

■Industrial Environments (e.g. environments where a mains voltage of 380 V three-phase is used)

■Medical Environments■Automotive Environments■Aircraft Environments

Any consequences resulting from the use of this product in working environments that are not approved are not the responsibility of TOSHIBA.The consequences of the use of this product in non-approved working environments may be:

■Interference with other devices or machines in the near surrounding area.

■Malfunction of, or data loss from, this product caused by disturbances generated by other devices or machines in the near surrounding area.

Therefore TOSHIBA strongly recommend that the electromagnetic compatibility of this product should be suitably tested in all non-approved working environments before use. In the case of automobiles or aircraft, the manufacturer or airline respectively should be asked for permission before use of this product.

Furthermore, for general safety reasons, the use of this product in enviroments with explosive atmospheres is not permitted.

viii User’s Manual