126 Expansion Options
Using an optional external DVD-ROM drive
5.375 x 8.375 ver 2.3
6Place the disc carefully in the disc tray, label side up.
7Gently press the disc onto the center spindle until you
feel it click into place.
Handle DVDs and CDs carefully, making contact only with the
center hole and edge. Never touch the surface of the disc.
Never stack discs. If you incorrectly handle the discs, you
could lose data.
8Make sure the disc is completely on the spindle and is
lying flat on the tray.
If you insert the disc incorrectly, it may jam the drive. If this
happens, contact your network administrator for assistance.
9Push the disc tray in by pressing gently on the center of
the tray until it clicks into place.
You are ready to use the disc.
Removing discs (CD or DVD)
To remove a disc with the computer turned on:
1Press the eject button on the drive.
Never press the eject button while the drive-in-use indicator
light is glowing. Doing so could damage the disc or the drive.
Also, if the disc is still spinning when you open the disc tray,
wait for it to stop spinning before you remove it.
2Pull the tray until it is fully open, remove the disc, and
place it in its protective cover.
3Gently push the tray in to close it.