18
CH 012
VOLUME 32
TV operation
Adjust the volume level by pressing VOL

+

or

–

.
The volume level will be indicated on the screen
by green bars. As the volume level increases, so
do the number of bars. If the volume decreases,
the number of green bars also decreases.
Set the TV/CABLE selection to the appropriate
position
21
.
1
2
3
Press direct channel selection (0–9) to select
the channel.
TV mode direct channel selection
When the TV/CABLE selection is in the TV
position, all channels can be instantly selected by
using two buttons. (for example, to select channel
2, press “0”, then “2”. If
you press only “2”,
channel selection will be
delayed for a few
seconds.) For channels
10 and above, press the
2 digits in order.
4
Notes:
•If a channel with no broadcast is selected, the sound will auto-
matically be muted.
•If a station being viewed stops broadcasting, the TV will auto-
matically shut itself off after 15 minutes.
To turn on the unit, press POWER.
TV - VHF/UHF channels
CABLE
- Cable TV channels
CABLE mode direct channel selection
When the TV/CABLE selection is in the CABLE
position, channels can be selected as follows:
TO SELECT CABLE TV CHANNELS:
1-9: Press “0” twice, then 1-9 as needed.
Example, to select channel 2, press “002”.
10-12: Press “0”, then the remaining 2 digits.
Example, to select channel 12, press “012”.
13-99: Press the 2 digits in order. Example, to
select channel 36, press “36”.
100-125: Press the 3 digits in order. Example, to
select channel 120, press “120”.
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed, the corresponding
channel will be selected in 2 seconds.
CABLE
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
TV
VHF
2-13
UHF
14-69

TV operation

0–9

VOL +/–

POWER
TV operation
5S20101A [E]p18-21 12/16/04, 4:27 PM18