27
Playback
Loading and unloading a cassette tape
Use only video cassette tapes marked .

Loading

Remove the erase prevention tab with a screwdriver. Cover the hole with a piece of adhesive tape.
To record again
Screwdriver
Press STOP/EJECT on the front panel or press
EJECT on the remote control.
Push the center of the tape until it is automatically
inserted. Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left. An
inverted cassette tape cannot be inserted.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
Automatic power ON
When you insert a cassette tape the unit power will turn ON automatically.
12
Erase prevention tab
Adhesive tape
Remove the cassette tape.
Erase prevention tab

Unloading

To prevent accidental erasure

To prevent accidental erasure

Tape speed and maximum recording time

Playback
Video cassette tape
SLP (Super Long Play)
T-160 T-120 T-90 T-60 T-30
2-2/3 hours 2 hours 1-1/2 hours 1 hour 30 minutes
8 hours 6 hours 4-1/2 hours 3 hours 1-1/2 hours
SP (Standard Play)
Automatic tape eject
This unit will automatically rewind the tape when the tape has ended. And when the tape is rewinded to its beginning,
the cassette tape will be ejected automatically.
Notes:
•Always eject the tape when not in use.
•The cassette tape can be ejected even if the POWER is “OFF”.
Tape Speed
5S20101A [E]p27-31 12/16/04, 4:28 PM27