28
Playback
Cassette tape playback
To play a prerecorded tape.
Load a prerecorded tape:
(When loading a cassette tape without the erase
prevention tab, playback will start automatically).
1
Press PLAY on the front panel or on
the remote.
Playback will start. “ ” will appear
on the screen for about 4 seconds.
Press STOP/EJECT once on the front
panel or press STOP on the remote.
The tape will stop but remain fully
loaded and ready to play.
“ ” will appear on the screen for
about 4 seconds.
To stop playback:
Stop the playback or recording with STOP.
To stop the tape-winding, press STOP. To switch to play-
back directly (without STOP), press PLAY.
Note:
This unit selects the playback tape speed SP or SLP automati-
cally.
2
To start playback:

Playback Rewind or forward the tape

To rewind the tape:
Press REW on the front panel or
press REV on the remote.
To forward the tape:
Press FF on the front panel or on the
remote.
Forward/Reverse picture search mode

REV

PLAY
STOP

FF

When the tape is being winded, you can switch to picture
search mode (see next page). To do this, press REV or
FF again and hold it down. The unit will resume the tape
winding as soon as the button is released.

REW

STOP/EJECT

PLAY FF

Illustration of
MV13Q41
5S20101A [E]p27-31 12/16/04, 4:28 PM28