36
Recording
Duplicating a video tape
If you connect the unit to another VCR or Camcorder, you can
duplicate a previously recorded tape. Make all connections before
turning on the power.
STOP

INPUT

REC
SPEED

Duplicating a video tape

To AUDIO IN
To VIDEO
OUT
Audio/Video cable
(not supplied)
Playback VCR
To AUDIO OUT
Recording VCR
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer’s
instructions. A typical camcorder dubbing hookup is
shown above.
Audio/Video cable (not supplied)
To AUDIO IN
To VIDEO IN
Recording VCR
To AV Jack
Playback Camcorder
Connection with Camcorder
Press SPEED to select the desired tape speed
SP or SLP.
It is recommended that you set the
Speed to the SP mode on the
recording VCR for best results.
1
Press INPUT to select AUDIO/VIDEO input
position.
“LINE” will appear on the screen.
2
Press PLAY on the playback VCR or camcorder.
3
Press REC to start recording.
4
Press STOP after duplicating a video tape.
5
Preparation:
•Load a cassette tape with the erase prevention tab
intact.
•Load a previously recorded tape into the playback VCR
or Camcorder.
To VIDEO IN
Note:
Unauthorized recording of copyrighted television programs, films,
video cassettes and other materials may infringe the rights of
copyright owners and be contrary to copyright laws.
Connection with second video recorder
LINE
Illustration of
MV13Q41
Illustration of MV13Q41
5S20101A [E]p32-36 12/16/04, 4:28 PM36