Real Time Clock

ProblemProcedure

The BIOS setting and system date/ time are lost.

The charge in the Real Time Clock (RTC) battery has run out - you will need to set the date and time in the BIOS setup application by using the following steps:

1.Press and hold the F2 key, and then turn on the computer. Release the F2 key one second after the computer is power on - the BIOS setup utility will load.

2.Set the date in the System Date field.

3.Set the time in the System Time field.

4.Press F10 - a confirmation message will be displayed.

5.Press the ENTER key - the BIOS setup application will end and the computer will restart.

Keyboard

Keyboard problems can be caused by the setup and configuration of the computer - please refer to the The Keyboard section for further information.

Problem

Procedure

Output to screen is

Please refer to your software's documentation to

garbled

ensure that it is not remapping the keyboard in any

 

way (remapping involves changing or reassigning

 

the function of each key).

 

If you are still unable to use the keyboard, you

 

should contact TOSHIBA Support.

 

 

Internal display panel

Apparent computer's display panel problems may be related to the computer's setup and configuration - please refer to the TOSHIBA System Settings section, for further information.

Problem

Procedure

No display

Press the function keys to adjust the display

 

priority, and to make sure it is not set for output to

 

an external monitor.

 

 

User's Manual

6-7