2.Click Power in the Settings charm, and then click Shut down while holding down the SHIFT key - ensure that the Power indicator is off.
3.Remove all cables and peripherals that are connected to the computer.
4.Close the display panel and turn the computer upside down.
5.Slide the battery lock into its unlock (
) position.
6.Slide and hold the battery release latch to disengage the battery pack and then lift it up to remove it from the computer.
Figure
2 | 3 | 1 |
| 3 |
|
2 |
| 1 |
Figure
1. | Battery lock | 3. Battery pack |
2. | Battery release latch |
|
Installing the battery pack
To install a battery pack, follow the steps as detailed below:
Do not touch the battery release latch while holding the computer or the battery pack might fall out due to the unintentional release of the battery release latch and cause injuries.
1.Insert the battery pack as far as it will go into the computer.
2.Ensure that the battery pack is securely in place and the battery lock is in its locked position.
3.Turn your computer over.
Additional memory module
You can install additional memory into the computer in order to increase the amount of system memory that is available. This section describes how to install and remove optional memory modules.
User's Manual |