Troubleshooting
Refer also to the documentation for your IrDA compatible device and related software.
Problem | Procedure |
|
|
Infrared devices do | Check that the device is connected to an electric |
not work as expected | outlet. Make sure the outlet is supplying power |
| by plugging in an appliance. |
| Make sure there is no obstruction blocking |
| communication between the computer and the |
| target device. |
| If problems persist, contact your dealer. |
|
|
If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation.
TOSHIBA tablet pen
Problem | Procedure | |
|
| |
Onscreen pointer | The system might be busy. If the pointer is | |
does not respond to | shaped as an hourglass, wait for it to resume its | |
tablet pen operation | normal shape and try again to move it. | |
| The tablet Pen might be set unable to use. Press | |
| Fn + F9 keys to change Pen setting to enabled. | |
|
| |
Tablet pen and on | Adjust the coordinate axis in the following | |
screen pointer do not | procedure. | |
move in the same | 1. | Open the Control Panel and click Printer |
manner |
| and other Hardware. |
| 2. | Click the Tablet and Pen setting. |
| 3. | Select screen orientation with Calibrate in |
|
| Setting tab. |
| 4. | Click Calibrate button. |
| 5. | Click the cross in Calibrate the screen and |
|
| click OK. |
|
| |
Unable input from | Adjust the setting in the following procedure. | |
tablet pen | 1. | Open the Control Panel and click Printer |
|
| and other Hardware. |
| 2. | Click the Tablet and Pen setting. |
| 3. | Adjust setting of each item of Pen options |
|
| tab and click OK. |
|
|
|
Portégé M200 | 99 |
|
|