Operating Basics

Trademarks:

SoundMAX® and the SoundMAX logo are registered trademarks of Analog Devices, Inc. PureAudio®, DSDA®, and Superbeam® are trademarks of Andrea Electronics. The Sensaura logo, Virtual Theater and Virtual Ear are trademarks and/or registered trademarks of Sensaura Limited. Yamaha XGlite is a trademark of Yamaha Corporation. All other trademarks are the property of their respective owners. All specifications subject to change without notice. © 2003 Analog Devices, Inc. All Rights Reserved.

Using the internal modem

If you purchased a computer model with a preinstalled internal modem, read this section for directions on connecting the modem. Refer to the online help files for the internal modem and for details on operation of your modem and modem software.

The internal modem does not support the voice functions. All data and fax functions are supported.

In case of a lightning storm, unplug the modem cable from the telephone jack.

Do not connect the modem to a digital telephone line. A digital line will damage the modem.

Region selection

Telecommunication regulations vary from one region to another, so you will need to make sure the internal modem’s settings are correct for the region in which it will be used.

1.Click start, point to All Programs, point to TOSHIBA, point to Networking and click Modem Region Select.

Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available. If you change the Country/Region in the Control Panel, the change may not take effect.

2.The Region Selection icon will appear in the Windows Task Bar.

3.Click the icon with the primary mouse button to display a list of regions that the modem supports. A sub menu for telephony location information will also be displayed. A check will appear next to the currently selected region and telephony location.

4.Select a region from the region menu or a telephony location from the submenu.

■When you click a region it becomes the modem’s region selection, and the New Location for telephony will be set automatically.

■When you select a telephony location, the corresponding region is automatically selected and it becomes the modem’s current region setting.

Portégé M200

425