Toshiba PORTEGE M300 4.10 Display assembly

4.10 Display assembly 4 Replacement Procedures
4 Replacement Procedures
4.10 Display assembly
Removing the display assembly
To remove the display assembly, follow the steps below and refer to figures 4-17 to 4-21.
1. Close the display and turn the computer face down.
2. Remove the following screws on the bottom.
 M2.0×6.0B BIND screw ×9 (Described "6" in the figure)
 M2.0×4.0B BIND screw ×1 (Described "4" in the figure)
(6)
(6)
(6)
(6)
6) (
(6)
(6)
(6)
(4)
(6)
Figure 4-17 Removing the screws (bottom)
4-28 PORTEGE M300 Maintenance Manual (960-504)