Toshiba PORTEGE M300 4.22 DC-IN jack

4.22 DC-IN jack 4 Replacement Procedures
4.22 DC-IN jack
Removing the DC-IN jack
To remove the DC-IN jack, follow the steps below and refer to figure 4-36.
1. Disconnect the DC-IN harness from the connector CN8800 on the system board and
remove it.
DC-IN jack
CN8800
Figure 4-36 Removing the DC-IN jack
Installing the DC-IN jack
To install the DC-IN jack, follow the steps below and refer to figure 4-36.
1. Connect the DC-IN harness to the connector CN8800 on the system board.
4-50 PORTEGE M300 Maintenance Manual (960-504)