4 Replacement Procedures 4.23 PC card slot cover
4.23 PC card slot cover
Removing the PC card slot cover
To remove the PC card slot cover, follow the steps below and refer to figure 4-37.
1. Turning up the insulator, remove the following screws securing the PC card slot
cover.
M2.0x4.0B FLAT BIND screw ×4
2. Release the hook and remove the PC card slot cover from the system board.
Hook
Insulator
M2.0x4.0S FLAT BIND
M2.0x4.0S FLAT BIND
Figure 4-37 Removing the PC card slot cover
PORTEGE M300 Maintenance Manual (960-504) 4-51