4 Replacement Procedures 4.29 Wireless antennas /Front panel
4.29 Wireless antennas /Front panel
Removing the wireless antennas / Front panel
To remove the wireless antennas / front panel, follow the steps below and refer to figures 4-
45 and 4-46.
1. Peel off six acetate tapes on the antenna cables.
2. Turn up the two insulators securing the wireless LAN antenna cables.
3. While peeling off the wireless antennas, remove the wireless LAN antennas and
bluetooth antenna from LCD cover by pulling it through the guide slit.
PORTEGE M300 Maintenance Manual (960-504) 4-65
Wireless LAN
antenna (AUX) Bluetooth antenna Wireless LAN
antenna (MAIN)
Insulator
Insulator
Acetate tape
Acetate tape
Figure 4-45 Removing the wireless antennas