Expansion Options

113

Installing additional memory (optional)

 

 

 

3Using a standard Phillips no. 1 screwdriver, remove the two screws that secure the expansion memory slot cover, then remove the cover. Put the screws where you can retrieve them later.

4Gently press the latches on both sides of the memory module to release the module from the connector.

The memory module pops partially out of the slot.

Pulling the latches away from the memory module

5Carefully remove the module from the slot and place it in antistatic packaging.

NOTE: Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors can cause memory access problems.

6Fit a new memory module if required, following steps 4 through 6 of Installing a memory module on page 110.

7Replace the expansion memory slot cover and secure it with the screws you removed earlier.