Expansion Options

115

Using a mouse

For more information about Fn-esse and Toshiba Hardware Setup see Toshiba Utilities on page 159.

Using a mouse

You may want to use a mouse instead of the computer’s built-in pointing device, the AccuPoint II. You can use a PS/2-compatible mouse, a serial mouse or a USB mouse.

TECHNICAL NOTE: A serial mouse disables the AccuPoint II. With a PS/2 mouse, you can choose to have the AccuPoint II active at the same time.

Connecting a serial mouse

To connect a serial mouse, connect the mouse cable to the serial port at the back of the computer. Once connected, the mouse is ready to use.

Refer to your mouse documentation for configuration information.

Connecting a USB mouse

To connect a USB mouse, connect the mouse cable to the USB port on the computer. Once connected, the mouse is ready to use.

Connecting a PS/2 mouse

CAUTION: Make sure the computer is off before you attach the mouse. Connecting a PS/2 mouse with the computer’s power on can damage the mouse, the computer, or both.