180

If Something Goes Wrong

Problems when you turn on the computer

4Using the arrow keys, highlight Battery Save Mode, then choose User Settings from the drop-down list.

HINT: This is the only way you can access the CPU Sleep mode function.

5Set CPU Sleep mode to Disabled.

6Press End, then enter Y to save your changes and exit.

7Restart your computer.

If the problem continues, contact the manufacturer of the program.

Problems when you turn on the computer

These problems may occur when you turn on the power.

The computer will not start.

Make sure you attached the AC adapter and power cable properly or installed a charged main battery.

Press and hold down the power button for a few seconds.

The computer starts but, when you press a key on the keyboard or touch the AccuPoint II, nothing happens.

To clear the condition, press Ctrl, Alt, and Del simultaneously, or press the reset button.

Clearing the condition may get you running, but it won’t solve a resource conflict. Read the documentation that came with the conflicting device and Resolving a hardware conflict on page 187.

The computer is not accessing the hard disk drive.

Your computer normally loads Windows from the hard disk. If you have a hard disk problem, you will not be able to start the