7-5
HW SETUP AND
PASSWORDS
Device Config

Device Configuration

This option lets you set the device configuration.
All Devices BIOS sets all devices.
Setup by OS Operating system sets devices that it can control. (Default)
Parallel/Printer
This tab lets you set the Parallel Port Mode. Use the Windows Device Manager to
make settings for the Parallel port.

Parallel Port Mode

The options in this tab are ECP and Standard Bi-directional.
ECP Sets the port type to Extended Capabilities Port (ECP). For
most printers, the port should be set to ECP. (Default)
Standard This setting should be used with some other parallel
Bi-directional devices.
Display
This tab lets you customize your computer’s display settings for either the internal
LCD screen or for an external monitor.

Power On Display

Lets you set the display to be used when the computer is booted.
Auto-Selected Selects an external monitor if one is connected. Other-
wise, it selects the internal LCD. (Default)
LCD + AnalogRGB Selects both the internal LCD and external monitor for
simultaneous display.
HW Setup window