User's Manual
8-2
OPTIONAL DEVICES
PC cards
The computer is equipped with a PC card expansion slot that can accommodate one
5 mm Type II card. Any PC card that meets industry standards (manufactured by
TOSHIBA or other vendor) can be installed. The slot supports 32-bit cards,
including CardBus PC cards, which provide superior performance for the greater
demands of multimedia. It also supports 16-bit PC cards, including PC card 16’s
multifunction card.

Inserting a PC card

The PC card connector is located on the left side of the computer.
Windows’ hot-install feature lets you insert PC cards while the computer’s power is
on.
NOTE: Do not insert a PC card while the computer is in standby or
hibernation mode. Some cards might not work properly.
To insert a PC card, follow the steps below.
1. Insert the PC card.
2. Press gently to ensure a firm connection.
Figure 8-1 Inserting a PC card
After inserting the card, refer to the card’s documentation and check the configura-
tion in Windows to make sure it is appropriate for your card.
PC CARD