OPERATING BASICS
4-11
❖❖
❖❖
❖Be sure to connect the universal AC adaptor when you write or rewrite.
❖❖
❖❖
❖Be sure to close all other software programs except the writing software.
❖❖
❖❖
❖Do not run software such as a screen saver which can put a heavy load on the
CPU.
❖❖
❖❖
❖Operate the computer at full power. Do not use power-saving features.
❖❖
❖❖
❖Do not write while virus check software is running. Wait for it to finish, then
disable virus detection programs including any software that checks files
automatically in the background.
❖❖
❖❖
❖Do not use hard disk utilities, including those intended to enhance HDD
access speed. They may cause unstable operation and damage data.
❖❖
❖❖
❖Write from the computer's HDD to the CD. Do not try to write from shared
devices such as a LAN server or any other network device.
❖❖
❖❖
❖Writing with software other than Drag’n Drop CD+DVD has not been con-
firmed. Therefore, operation with other software cannot be guaranteed.
When writing or rewritingNote the following when you write or rewrite a CD-R or CD-RW.
❖���
❖❖
❖Always copy data from the HDD to the CD. Do not use cut-and-paste. The
original data will be lost if there is a write error.
❖❖
❖❖
❖Do not perform any of the following actions:
• Operate the computer for any other function, including use of a mouse or
Touch Pad, closing/opening the LCD panel.
• Start a communication application such as a modem.
• Apply impact or vibration to the PC.
• Install, remove or connect external devices, including the following:
PC card, SD card, USB devices, external display, optical digital devices.
• Use the CD/MP3 control buttons to reproduce music and voice.
• Open the optical media drive.
❖❖
❖❖
❖If the media is poor in quality, dirty or damaged, writing or rewriting errors may
occur.
❖❖
❖❖
❖Set the computer on a level surface and avoid places subject to vibration such
as airplanes trains, or cars. Do not use an unstable surface such as a stand.
❖❖
❖❖
❖Keep mobile phones and other wireless communication devices away from the
computer.