OPERATING BASICS
4-17
❖❖
❖❖
❖Do not use hard disk utilities, including those intended to enhance HDD
access speed. They may cause unstable operation and data damage.
❖❖
❖❖
❖Write from the computer's HDD to the CD/DVD. Do not try to write from shared
devices such as a LAN server or any other network device.
❖❖
❖❖
❖Writing with software other than Drag’n Drop CD+DVD, DVDfunSTUDIO and
DVDMovieAlbum is not recommended.
When writing or rewriting
Please observe/consider the following when you write or rewrite to a CD-R/RW or
DVD-R/-RW/-RAM disc.
❖❖
❖❖
❖Do not perform any of the following actions when writing or rewriting:
• Operate the computer for any other function, including using a mouse or
Touch Pad or closing/opening the LCD panel.
• Start a communication application such as a modem.
• Apply impact or vibration to the computer.
• Install, remove or connect external devices, including the following:
PC card, SD card, USB devices, external display, optical digital devices.
• Use the Audio/Video control button to reproduce music or voice.
• Open the DVD Multi drive
❖❖
❖❖
❖Do not use standby/hibernation while writing or rewriting.
❖❖
❖❖
❖Make sure writing or rewriting is completed before going into standby/
hibernation. Writing is completed if you can open the DVD Multi drive tray.
❖❖
❖❖
❖Set the computer on a level surface and avoid places subject to vibration such
as airplanes, trains, or cars. Do not use an unstable surface such as a stand.
❖❖
❖❖
❖Keep mobile phones and other wireless communication devices away from the
computer.
❖❖
❖❖
❖Always copy data from the HDD to the DVD-RAM. Do not use cut-and-paste.
The original data will be lost if there is a write error.
Drag’n Drop CD+DVD
Note the following limitations when you use Drag’n Drop CD+DVD:
❖❖
❖❖
❖DVD-Video cannot be created using Drag’n Drop CD+DVD.
❖❖
❖❖
❖DVD-Audio cannot be created using Drag’n Drop CD+DVD.
Writing CD/DVDs on DVD Multi drive