Section 2

Getting Started

Loading the Battery

Before using the camcorder, users must load the Lithium-ion rechargeable battery come within the package.

1.Insert the battery according to the correct polarity marks ( + or -).

2.Close the battery cover firmly.

Note

•Please take out the battery from the camcorder and remove the insulator on the battery connection

before use.

REMOVE

Inserting and Removing an SD Card (Optional)

The camcorder comes with an internal memory which allows you to store photos and videos. You can expand the memory capacity by using an optional SD memory card.

1.Insert the memory card into the slot. Please refer to the figure on the right side.

2.To remove an installed SD card, press the card inwards to release it.

3.When the card pops out, gently remove it from its slot.

4.Recommended memory capacity: 1GB or above.

Note

•When a memory card is fitted, videos/photos are saved on the card rather than on the built-in memory.

•Protecting Data on an SD Card: SD Card is read- only when it is locked. No photos or videos can be recorded when the SD card is locked. Make sure the lock is on the writeable position before recording any media.

Writeable Write-Protected

positionPosition

10

EN