4.24 Speakers 4 Replacement Procedures
3. Remove the two tapes securing the speaker cables.
4. Remove the speakers and speaker cables from their guides.
5. Remove the side speaker (right and left) from the front of the computer.
Side cover
Figure 4-35 Removing the Side cover
Installing the Speakers
To install the speakers, follow the steps below and refer to figures 4-34 and 4-35.
1. Install the side cover (right and left) on the front of the computer.
2. Place each speaker from the back and secure the side covers with the following
screws.
• M2.5×6 FLAT HEAD screw ×4
3. Route the speaker cables through guides.
4. Secure the speaker cables with tape.
5. Seat the insulator.
Satellite A20 Maintenance Manual (960-444) 4-63