System Configuration Setup

163

Configuring MegaRAID IDE

Using the MegaRAID IDE Setup UtilitySetup window

The Setup window has three sections:

carray information

cphysical drive information

chelp information

Only the Array Information window and Physical Drives Information window are active. The Array Information window is editable. The Physical Drives Information window is not editable.

To access this screen, press the <Ctrl> + <M> keys during boot- up.

Array Information

This section of the screen displays all the disk arrays configured. Use this section to create, delete or edit the existing configurations. The disk arrays are displayed as a node in a tree, like Windows Explorer. When opened, each node displays the properties of the array. Press the arrow keys <↑ > and <↓ > to navigate the properties and press <Enter> to edit your selection.

cArray configuration type or RAID level (Stripe, Mirror)