202 | Installing Software |
Auto-shutdown function |
Auto-shutdown functionThe auto-shutdown enables automatic execution of the sequence from shutting down the OS by the power switch through to turning OFF the power.
The auto-shutdown function runs only on Windows NT/2000.
Setting the auto-shutdown functionManually install the auto-shutdown function by installing Harnes- sEye/web after installation of Windows NT/2000 is completed.
NOTE: HarnessEye/web can also be installed automatically by automatically installing Windows 2000/NT by the Toshiba Server Setup Tool.
Canceling the auto-shutdown function1Log into Windows NT as an Administrator (or user having equivalent privileges).
2Select “ASD” under “Start” - “Settings” - “Control Panel” - “Management Tool” - “Services”, and click “Stop”.
Make sure that the auto SD/remote status display LED is lit (orange).
CAUTION: After the auto-shutdown function is canceled, the power is instantly turned OFF without OS shutdown processing being performed when the power switch is pressed.