Toyota pmn 15. Installation engine compartment lower

15. Installation engine compartment lower

1. APPLY LIQUID GASKET TO OIL PAN.

(a) Apply the liquid gasket onto the clean sump surface.

NOTICE:Liquid gasket 08826-00080

2. INSTALL OIL PAN.

(a) Within 3 minutes after applying the liquid gasket install

the oil-sump onto the engine using the 14 bolts and 2

nuts.

R: Bolt (14 pcs.)

R: Nut (2 pcs.)

(b) Tighten the bolts and nuts carefully first with 5 Nm and

after with the final torque.

Torque: 9 Nm

3. INSTALL OIL PRESSURE SWITCH EXTENSION.

(a) Remove oil pressure switch.Use Special tool (SST

09816-30010)

R: Oil pressure switch

(b) Install the oil-pressure switch extension into the oil

filter housing using Loctite 243.

K: Extension(15-2)

Torque: 13 Nm

U: Oil filter

(d) Install a new oil filter.

K: Oil filter (26-7)

4. INSTALL OIL PRESSURE SWITCH EXTENSION

BOLT.

(a) Route the oil pressure tube towards the adapter.

(b) Insert the hollow bolt with the 2 copper seal rings into

the adapter using Loctite 243.

NOTICE:When applying the correct torque

onto the hollow-bolt ensure that the

adapter is secured against further

rotation and that the pressure tube is

pointing into the correct direction.

K: Hollow-bolt (15-1)

K: Seal rings (2 pcs.) (15-3)

Torque: 20 Nm