TL-MR3420 3G/4G Wireless N Router User Guide
Note:
If you are not familiar with the setting items in this page, it's strongly recommended to keep the
provided default values; otherwise it may result in lower wireless network performance.

4.6.5 Wireless Statistics

Choose menu “WirelessWireless Statistics”, you can see the MAC Address, Current Status,
Received Packets, Sent Packets and Configure for each connected wireless station.
Figure 4-28 The Router attached wireless stations
MAC Address - The connected wireless station's MAC address
Current Status - The connected wireless station's running status, one of STA-AUTH /
STA-ASSOC / STA-JOINED / WPA-Enterprise / WPA-Personal / WPA2-Enterprise /
WPA2-Personal / AP-UP / AP-DOWN / Disconnected
Received Packets - Packets received by the station
Sent Packets - Packets sent by the station
Configure - The button is used for loading the item to the Wireless MAC Filtering list.
Deny - if the Wireless MAC Filtering function enable, deny the station to access.
Allow - if the Wireless MAC Filtering function enable, allow the station to access.
To update this page and to show the current connected wireless stations, click on the Refresh
button. If the numbers of connected wireless stations go beyond one page, click the Next button
to go to the next page and click the Previous button to return to the previous page.
Note:
This page will be refreshed automatically every 5 seconds.
4.7 DHCP
Figure 4-29 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 4-29): DHCP Settings,
DHCP Clients List and Address Reservation. Click any of them, and you will be able to
configure the corresponding function.
-45-