TL-MR3420 3G/4G Wireless N Router User Guide

4.12.2 System Routing Table

Choose menu “Advanced Routing System Routing Table”, you can configure the system
routing table in the next screen (shown in Figure 4-63). System routing table views all of the
valid route entries in use.
Figure 4-63 System Routing Table
Destination Network - The Destination Network is the address of the network or host to
which the static route is assigned.
Subnet Mask - The Subnet Mask determines which portion of an IP address is the network
portion, and which portion is the host portion.
Gateway - This is the IP address of the gateway device that allows for contact between the
Router and the network or host.
Interface - This interface tells you whether the Destination IP Address is on the LAN &
WLAN (internal wired and wireless networks), the WAN (Internet).
4.13 Bandwidth Control
Figure 4-64 Bandwidth Control
There are two submenus under the Bandwidth Control menu as shown in Figure 4-64. Click
either of them, and you will be able to configure the corresponding function. The detailed
explanations for each submenu are provided below.

4.13.1 Control Settings

Choose menu “Bandwidth Control Control Settings”, you can configure the Egress
Bandwidth and Ingress Bandwidth in the next screen. Their values you configure should be less
than 100000Kbps. For optimal control of the bandwidth, please select the right Line Type and
ask your ISP for the total bandwidth of the egress and ingress.
-70-