Assembly & Set-Up

3

 

 

 

Contents of Carton

 

•

One Lawn Mower

•

One Lawn Mower Operator’s Manual

•

One Bottle of Oil

•

One Grass Catcher

•

One Engine Operator’s Manual

•

One Side Discharge Chute

Assembly

NOTE: This unit is shipped without gasoline or oil in the engine. Fill up gasoline and oil as instructed in the accompanying engine manual BEFORE operating your mower.

Handle

1.Remove any packing material which may be between upper and lower handles.

a.Pull up and back on upper handle as shown in Fig.

3-1. Make certain the lower handle is seated securely into the handle mounting brackets. Do not crimp cable while lifting the handle up.

A

B

2.Tighten star knobs securing lower handle to handle brackets. See Fig. 3-2. Make certain the lower handle is seated securely into the handle mounting brackets.

B

Figure 3-1

b.Tighten star knobs to secure upper handle to lower handle. Make sure that each carriage bolt is seated properly in the handle.

Figure 3-2

3.The rope guide is attached to the right side of the upper handle. See Fig. 3-3. Loosen the wing nut which secures the rope guide.