MAINTENANCE AND REPAIR INSTRUCTIONS
WARNING: To prevent serious injury, never perform maintenance or repairs with unit running. Always service and repair a cool unit.
WARNING: Avoid accidental starting. Stop motor and disconnect extension cord prior to performing any maintenance or repairs.
REMOVING AND REPLACING TINES
Cultivator tines are subject to wear and should be replaced if any signs of damage are present. Tines should also be removed and cleaned after each use.
WARNING: Cultivator tines are sharp. Always wear leather gloves to protect your hands when handling tines.
To replace the cultivator's tines:
1.Remove the click pin found at the end of each tine shaft.
NOTE: Each tine assembly is stamped either "A" or "B" (Fig. 9). Note each tine's location on the shaft for easier reassembly.
WARNING: Do not wash cultivator with a hose. Avoid getting water on motor and electrical connections.
Fig. 13
9