Storage, Vacation, Moving
If the unit will not be used for an extended period, or otherwise stored, follow these steps completely:
WARNING
Electrical Shock Hazard. Disconnect power before servicing. Before operating, replace all panels. Failure to do so may result in death or electrical shock.
1.Remove all consumable contents from the unit.
2.Disconnect power to the unit.
3.Shut off water supply to the unit at the main water source.
IMPORTANT
•If the ambient temperature is expected to drop below 45°F, turn off and unplug unit, and drain all water from the unit to prevent freezing damage not covered by the warranty.
•The use of
4.Disconnect the water valve inlet and outlet lines, and allow them to drain completely.
5.Reconnect power to the unit, and allow it to run for one hour (minimum) until any remaining ice has been ejected from the ice maker assembly.
6.Disconnect power to the unit, dry any remaining water from the ice maker assembly, and reconnect any lines removed from the water supply valve.
7.Disconnect the power cord from its outlet, and leave it disconnected until the unit is returned to service.
8.Clean and dry the interior of the cabinet (See CLEANING AND MAINTENANCE: GENERAL CLEANING).
9.During periods of
Product Disposal
If the unit is being removed from service for disposal, check and obey all Federal, State and/or Local regulations regarding the disposal and recycling of refrigeration appliances, and follow these steps completely:
1.Disconnect power to the unit and unplug the power cord from its outlet.
2.Shut off water supply to the unit at the main water source and disconnect the supply line to the unit’s water valve.
DANGER
RISK OF CHILD ENTRAPEMENT. Before you throw away your old refrigerator or freezer, take off the doors and leave shelves in place so that children may not easily climb inside.
3.Remove the cabinet door if equipped and secure all interior shelves to the interior of the cabinet using a heavy duty cloth or package sealing tape.
10 | CLR2160, CLRCO2175 |
