16
REGISTERING A HANDSET TO A BASE UNIT
Each handset must be registered to a base unit in order to make and receive calls.
The DECT 1812 is automatically registered to the first base unit for you.
A handset can be registered to up to four base units.
• press and hold the [PAGE]key on your base until ringing begins (15-20 seconds).
You will then be ready to register another handset to your base unit.
• press [menu]key until you reach the
H-REGISTERdisplay on the LCD.
• press [OK]key to choose this menu item.
•SEARCH BS 1 will be displayed.
• press [menu]key to scroll between base units
2-4 (any available base number is OK).
• press [OK] to confirm your choice.
• the RFPI code will be displayed after a short wait.
• press [OK]to confirm.
• enter your base unit PIN number and press [OK].( Factory default is 1590).
SELECTING A BASE UNIT
If your handset is registered to several base units, the selection of the most
appropriate base unit can be done manually or automatically.
• press [menu]key until you reach the
SELECT BASE display on the LCD.
• press [OK]key to choose this menu item.
•BASE NO: 1 will be displayed.
• press [menu]key to scroll between base units
1-4 or AUTO.
• press [OK]to confirm your choice.
• press [OK] to register to this new base unit.
H-REGISTER
If your handset has not been
subscribed to your chosen
base unit, NOT SUB: will
be displayed. In this case, try
again by choosing another
base or subscribe the
handset to the new base first.