Installation
Selecting a Location
Before choosing a location for your new phone, there are some important guidelines you should consider:
lThe location should be close to both a phone jack and power outlet.
lKeep the Base Unit and Handset away from sources of electrical noise such as motors or fluorescent lighting.
lBe sure there is sufficient space to fully extend the Base Unit antenna.
lThe Base Unit can be placed on a desk or tabletop or wall mounted.
lIf you decide to mount your phone on the wall, make sure to change the Handset Retainer so that the tab which holds the Handset faces up. (See page 17 for more information.)
lYou should charge your new phone for
Telephone Line Outlet
Modular Jack
Most phone equipment available now uses modular jacks. Phone cords are fitted with a molded plastic connector which plugs into this type of jack. If you do not have modular phone jacks, contact your local telephone company for information about their installation.
Connecting the Telephone Cords
Consider these safety guidelines before connecting the telephone cords:
CAUTION:
lNever install telephone wiring during a lightning storm.
lNever touch uninsulated telephone wires or terminals unless the telephone line has been disconnected.
lUse caution when installing or modifying telephone lines.
Applying Power to the Base Unit
All the XCA650/XCA750 phones require an AC outlet and the included AC Adapter. To relieve strain on the DC plug when the phone is placed on a desk or table, connect the adapter as shown below.
Wrap the power cord around the convenient notch on the bottom.
Important: Place the power cord so that it does not create a trip hazard, or where if could become chafed and create a fire or other electrical hazards.
9 | 10 |
