DISPLAY INDICATIONS (RIGHT SIDE)

Sub (VFO-B) Receiver S-Meter

Displays the strength of signals received on the Sub band (VFO-B).

TX

This indicator appears during transmission on the Sub band (VFO-B) frequency.

BUSY

This indicator appears whenever the Sub band (VFO-

B)receiver squelch is open. If this indicator is not show- ing, and reception seems to have been lost on the Sub receiver for no apparent reason, check the position of the Sub [SQL] knob and rotate it fully counter-clock- wise to restore reception.

Sub (VFO-B) Frequency Display

This is the Sub band (VFO-B) frequency display.

ADVICE:

￿When setting the Menu items, the Menu item name will appear in this area during setup.

￿When setting the CTCSS frequency for Encoding or Tone Squelch operation, the current tone fre- quency will appear in this area during setup.

￿When activating the CW Spot Tone, the current tone frequency will appear in this area.

LSB, USB, CW, AM, FM, RTTY, PKT

Displays the currently-selected operating mode for the Sub (VFO-B) receiver.

FAST

This indicator appears when the [SUB VFO-B] knob’s tuning rate is selected to fast.

AGC A, F, M, S

Displays the currently-selected AGC decay time for the Sub (VFO-B) receiver.

A: Auto, F: Fast, M: Medium, S: Slow

NB

This indicator appears when the Sub (VFO-B) receiver’s (short duration) Noise Blanker is activated. This indicator will blink for three seconds, and thereafter appears continuously, when the Sub (VFO-B) receiver’s longer-pulse Noise Blanker is activated.

NAR

This indicator appears whenever the optional Sub (VFO-B) receiver’s narrow filter is selected.

Page 30

FT-2000 OPERATING MANUAL