VX-4100 SERIES OPERATING MANUAL 3

TX/BUSY Indicator

Indicates the transceiver’s Transmit/Receive Status.

Steady Red: Transmitting in progress

Steady Green: Signaling Off

Blinking Green: Busy Channel/Squelch Off

Channel Number Indicator

Indicates the operating channel.

Transceiver Status Indicator

The “P1” and “P2” indicators show current transceiver status, which can be

customized via programming by your VERTEX STANDARD dealer to meet

your communications/network requirements. The possible “P1” and “P2” dis-

plays are explained below.

CONTROLS & CONNECTORS
MONI
SCAN Channel
+4 CH
LOW
TA (Talk Around)
Encryption Disable
(Requires optional Unit)
Emergency
HOME
Horn Alert
Public Adress
Key Lock
EXT ACC
REC/PLAY
INDICATOR
P1 P2
This indicator blinks when CTCSS- or DCS-
controlled squelch is disabled. The indicator is
Illuminated constantly while the audio is pass-
ing normally.
Illuminates the indicator when the operating
channel is selected on the SCAN channel.
Illuminates the indicator when the radio recalls
the alternate channel list.
Illuminates the indicator when the radio’s trans-
mitter is set to the “Low Power” mode.
Illuminates the indicator when the “Talk Around”
function is activated.
Illuminates the indicator when the “Voice
Scrambler” function is disabled temporarily.
Illuminates the indicator when the “Emergency”
feature is activated.
Illuminates the indicator when you recall the
Home group/channel.
Illuminates the indicator when the “Horn Alert”
feature is activated.
Illuminates the indicator when the radio is
turned to a PA amplifier.
Illuminates the indicator when the front panel’s
keys are locked.
Illuminates the indicator when the output port
on the Accessory Connector is turned to “ON.”
Blinks the indicator while the received audio is
recording. Illuminates the indicator when the
voice recording is completed.
STATUS DESCRIPTION