VXA-710 SPIRIT OPERATING MANUAL
27
SPECTRUM SCOPE MONITOR
If you assign the Spectrum Scope Monitor feature to the
key (see page 40), you may view operating activity
on channels above and below the current operating chan-
nel while operating in the VFO, Memory Tune, and PMS
modes.
The display indicates the relative signal strength on chan-
nels immediately adjacent to the current operating fre-
quency.
Set the radio to the VFO mode by pressing the
key, if necessary.
Press (or press and hold
in) the key to activate
the Spectrum Scope
Monitor.
Once the Spectrum Scope Monitor is activated, press
the key to change the visible bandwidth between
±15 channels and ±30 channels (default: ±30 chan-
nels). The visible bandwidth, however, depends on the
selected channel step size, so match the channel step
to those typically used in your area.
To turn the Spectrum Scope Monitor off and operate
on the centered (and displayed) channel, simply press
the PTT switch.
Note 1: Audio output will be interrupted during Spectrum
Analyzer operation. This is normal.
Note 2: The Spectrum Scope Monitor may not be acti-
vated on the BRS Memories.