Vidikron Vision 100t manual Connections to the Vision 90t/100t, DVI Connections See Figure

Installation

Proceed as follows to connect the Vision 90t/100t to your video sources, external controller(s) – if present – and AC power.

When connecting your equipment:

•Turn off all equipment before making any connections.

•Use the correct signal cables for each source.

•Ensure the cables are firmly connected. Tighten the thumbscrews on connectors that have them.

To access the connector panel, press the large, black door release button so it pops out. Then, turn the knob clockwise or counter-clockwise and pull gently on it to open the door.

Connect your video sources to the Vision 90t/100t as shown and described in the sections that follow.

DVI Connections: See Figure 3-6.

Use the DVI inputs whenever possible. This ensures the highest video

Tip quality because the signal is carried in the digital domain throughout the entire signal path, from source component output into the projector.

3.6

Connections to the Vision 90t/100t

Connector Panel Access

Connecting the Vision

90t/100t to Source

Components

INPUTS

R	G
Pr	Y

RG

PrY

1 DVI

DVI 1

	INPUTS
B
Pb	H

BH

Pb

2 DVI

DVI 2

V
				TRIGGERS
	HD1			TRIGGERS
	HD1
			1	2	3	IR
	HD2		1	2	3	IR
	HD2
V					1 VIDEO-S
VIDEO COMPONENT					S-VIDEO 1	CONTROL
Pb	Pr	Y	VIDEO			232-RS
					2 VIDEO-S
					S-VIDEO 2
Pb	Pr	Y	VIDEO			RS-232
COMPONENT VIDEO						CONTROL

DVI Source (DVD Player or HD Tuner with HDMI or DVI out)

Figure 3-6. DVI Source Connections

Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual 21