ViewSonic V75 Operation

Optiquest V75

Operation

Adjust your Optiquest V75 monitor using the buttons on the front control

panel as shown below. The buttons scroll down the OnView® Main Menu

(page 8) and adjust each control (pages 8 through 12).

To adjust the monitor, follow the numbered steps in sequence as shown below:

1To display the OnView Main Menu, push the OSD button.

2To select the control you want to adjust, turn the Control Wheel (located

under the OSD button). Clockwise scrolls down the Main Menu; counter-

clockwise scrolls up. NOTE: For some controls you must first select

another menu from the Main Menu (see page 8).

3With your selection highlighted, push the OSD butto n again. The control

adjustment screen displays.

4To adjust the control you selected, turn the Control Wheel. The number

on the side of the adjustment screen changes accordingly.

5When finished making adjustments, press the OSD button to save your

changes and return to the Main Menu.

6To exit the Main Menu, turn the Control Wheel until EXIT is highlighted,

and press the OSD button. Shortcut: Press and hold the OSD button.

Power light:

Green = On

Orange = power

(Flashing) saving

mode

ONE TOUCH

OSD Button

Power* On/Off

Button

Control Wheel

(under OSD button)

RECALL

Button

AUTO

Button

(automatically sizes

screen image)

Operation

* The monitor automatically

degausses

each time you turn it on, removing the buildup of magnetic

fields that can affect color purity and convergence. To prevent possible damage, if you turn the

monitor off, wait 20 minutes before turning it on again. Do not turn the monitor on and off

repeatedly. To manually degauss the monitor, see the instructions on page 10.