Viking DVA-2WA dimensions

The DVA-2WA is a digital announcer with a built in 2 watt

amplifier. Designed to provide music and promotion on

hold, the DVA-2WA can playback in a continuous loop or

alternate between promotions and an auxiliary music

source in timed intervals. Any number of multiple mes-

sages may be recorded.

The announcer comes with four professionally pre-recorded

promotion on hold messages, a power supply and cabling

for an easy plug and play installation.

Promote Your Business While

Customers Hold and more...

• 7.5 minutes of user recordable memory

• Select from user recorded messages or four pre-

recorded on-hold pacifier messages

• Three playback options: on demand, continuous loop and

timed intervals

• Non-volatile memory (no batteries required)

• Built-in 2 watt amplifier will drive up to three 25AE Paging

Horns, 30AE Ceiling Speakers or equivalent (Fax Back

Document 498)

• Record from electret mic, carbon handset, tape, CD,

PC sound card or any line level device

• Monitor recording from a standard handset

• 600 ohm audio output for high wattage amplifiers

• Multiple message capabilities (total number of messages

only limited to maximum record time)

• AGC (Automatic Gain Control) for trouble free recording

• Auxiliary audio (MOH) input for background music

between messages

• Remote trigger input for on-demand playback from a

remote contact closure

• Press and hold play mode

• Status LED for record and playback indication

• Master and auxiliary input volume controls

• I.O. (Input/Output) communications port (allows only

one DVA-2WA to announce at a time)

Power: 120V AC/12V DC, 500mA adapter provided

Dimensions: 133mm x 89mm x 44mm (5.25” x 3.5” x 1.75”)

Shipping Weight: 1.0 kg (2.2 lbs)

Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95%

non-condensing humidity

Frequency Response: 100-3.4KHz

Sampling Rate: 64K (equivalent)

User Message Length: 7.5 minutes maximum

Recording Audio Input Level: 30mV - 1.0V RMS (AGC range)

600 Ohm Audio Output Level: 0.3V RMS maximum (across a

600 ohm load)

Speaker Output Power: 2 watt peak

Connections: (1) 6-position cage clamp terminal block, (3) 3mm

(1/8”) audio jacks, (1) handset jack

Pre-recorded Pacifier Message Length: 30 seconds total

Minimum Speaker Impedance: 2.66 Ohms: (3) 8-Ohm speak-

ers in parallel

I.O. Com Wire Run Length: 1000 ft maximum (24 Awg)

Remote Trigger Wire Run Length: 4000 ft maximum (24 Awg)

TECHNICAL

The output of the DVA-2WAmay also be connected directly to loudspeakers for repeated mes-

sages or played at the push of a button for museum displays, information booths, point of inter-

est locations, retail applications, etc.

The DVA-2WA’s non-volatile memory eliminates the need for batteries or costly built in tape

• On-hold promotion messages and background-music

• Non-volatile message repeater for...

- Museum and information displays

- Car rental “Leave the keys in the ignition...”

- Airport “Loading and unloading only...”

- Smoking “This is a non-smoking building...”

- Amusement Parks “Please keep your hands in the

vehicle at all times...”

- Retail “Blue light special in aisle 5...”

decks. This provides the conven-

ience of recording at the shop or pro-

fessional studio and then shipping to

the installation site.

DVA-2W

A-2WA

Digital Voice

Announcer with

Built-In Amplifier

July 12, 2001