G. Adding Paging to Homes and Small Businesses with Single Line Phones
The C-1000A can be used to control a paging amplifier from a single phone line. The amplifier used must provide talk
battery, such as the PA-2A(Fax Back Document 485) or CPA-7B (Fax Back Document 455). If need be, a doorbox
or a second paging amplifier may also be added to the C-1000A Doorbox 2 terminals (see Installation section A).
Note: The C-1000Amust be programmed to be in the Paging Mode, ✱4(see Programming section B and Operation
section B).
VIKING© MODEL C-1000A
VIKING
ELECTRONICS
HUDSON, WI 54016
DOOR ENTRY/PAGING
CONTROLLER
POWER 13.8V AC
LINE IN PHONES STATUS
AUX.CONTACT
OUTPUT
DOOR
STRIKE 1
DOOR
BOX 1
DOOR BOX
POWER
DOOR
BOX 2
DOOR
STRIKE 2
3 4 5 6 7 8 9 1011 12
12
or
C.O. Line
or Analog
PABX/KSU
station
Standard
Analog
Phones
Unused
Trunk
Input of
PABX/KSU
Talk Battery Switch
OFF ON
VIKING©
MODEL PA-2A
13.8VAC 1 2 3 4 5
RINGING
LINES
PAGING/LOUD RINGING
AMPLIFIER SYSTEM
PAGING RINGING
BATTERY
FEED
1-3 4-6 OFF ON
VIKING
ELECTRONICS
HUDSON,WI 54016
13.8V AC
Adapter
included
120V AC
120V AC
F. Line Concentrator Mode (One Telcom Device Can Answer up to Three Lines)
VIKING© MODEL C-1000A
VIKING
ELECTRONICS
HUDSON, WI 54016
DOOR ENTRY/PAGING
CONTROLLER
POWER 13.8V AC
LINE IN PHONESSTATUS
AUX.CONTACT
OUTPUT
DOOR
STRIKE 1
DOOR
BOX 1
DOOR BOX
POWER
DOOR
BOX 2
DOOR
STRIKE 2
3 4 5 6 7 8 9 1011 12
12
Talk Battery Switch
OFF ON
Fax Machine
Line 2
Line 3
Red
Green
Red
Green
C.O. Line
or Analog
PABX/KSU
station
or
Answering
Machine
Standard
Analog Phone
C.O. Line
or Analog
PABX/KSU
station
C.O. Line
or Analog
PABX/KSU
station
Line 1
1 2 3
Dip Switches
ON
OFF
13.8V AC
Adapter
included
120V AC
The C-1000A can be used as a line concentrator, allowing up to 3 separate C.O. lines to connect to one telcom device.
1. Connect as shown below.
2. Move DIP switch 3to the OFF position (see Programming section E).
3. Be sure the “Talk Battery Switch” is OFF.
4. See Operation section C.
(4)