Connecting an External Receiver or Amplifier
You can connect an external receiver or amplifier to your Micro Chip Display Projection TV.
To connect your external receiver or amplifier :
1Connect the red (R) and white (L) audio jacks on the back of your external amplifier or receiver to the AUDIO OUT jacks on the back of your RPTV.
2Set the REAR AUDIO OUTPUT in the OSD to VARIABLE if you want to use the volume controls on your RPTV, or FIXED if you want to use the volume controls on your amplifier or receiver. For information about the OSD, see“Using the OSD” on page 31.