I cannot return to

 

• The on-screen menu has guided setup. Press MENU, then select Help > System Reset >

 

 

the Setup App.

 

Start Setup Wizard. Enter your PIN (default is 0000). Select Yes.

 

 

 

 

 

 

 

 

 

 

 

There are black/gray bars on the top/bottom/ sides of the picture.

•Set the TV to Wide or Zoom Mode. Press MENU, then select Wide. Highlight Wide or Zoom and press OK.

•Adjust the video settings of your external device (Blu-ray™or DVD player).

•If using the RGB (computer) input, ensure you are using a supported desktop resolution.

•Some television channels add black bars to the picture.

The TV does not respond when I press buttons on the remote control.

The TV displays “No Signal”

•Insert new batteries into the remote.

•Point the remote directly at the TV’s sensor.

•Ensure nothing is blocking the TV’s sensor. (The sensor is on the front of the TV, in the lower right corner.)

•Ensure your connected devices are turned on.

•Press the INPUT button on the remote and select the input to which your device is connected (HDMI, Composite, etc).

•If connected to a cable/satellite service with a set-top box via coaxial cable, press the TV button on the remote, then use the Number Pad to change the channel to 3 or 4.

 

 

 

 

 

 

 

 

• Ensure your antenna or cable/satellite box is connected to the TV.

 

 

The TV displays

 

 

• Select the input to which your antenna or cable/satellite box is connected.

 

 

“Please Scan Channels!”

 

 

 

 

• Perform a channel scan. Press MENU, then select TV > Channels > Scan Channels > On.