Vulcan-Hart ML-126451, ML-126210 Operation, OVEN CONTROL PANEL Fig, Main Power Dial - 0 means OFF

OPERATION

WARNING: HOT GLASS, GREASE, AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING AND SERVICING THE OVEN.

OVEN CONTROL PANEL (Fig. 2)

DISPLAY

PROGRAMMABLE

CONTROLS

THERMOSTAT

DIAL

ROTISSERIE

DIAL

MAIN POWER

DIAL

PL-41175-1

Fig. 2

DISPLAY — Shows temperature (°F) and time (HH:MM) when first turned on.

Programmable/Automatic: Colon flashing, remaining cooking time is shown.

Manual: Nothing will show on the display.

AUTOMATIC CONTROLS — Set all dials on "P". See pages 10-12 in this manual.

PROGRAMMABLE CONTROLS – Set all dials on "P". See pages 13-16 in this manual.

MANUAL CONTROLS – Use control dials. Comes with Programmable Controls only.

Thermostat Dial — 0°F means heat is OFF.

•Turn dial to desired temperature (150-480°F [66°C - 249°C]).

Rotisserie Dial — "0/P" means rotisserie is OFF.

•Set Dial Thermostat to desired temperature.

•Set the Rotisserie on:

- Oven working without restrictions.

- Only rotor moves.

- Oven working, one lamp remains off.

-Oven working, both lamps remain off.

•Set the Main Power dial on the hand symbol. Operator side heating lamp will remain on until the desired temperature is reached in oven.

Main Power Dial — "0" means OFF.

•Set Main Power dial on the hand symbol.

•Set Rotisserie dial to desired manual setting.

•Set Thermostat Dial to desired temperature.

– 9 –