Table of Contents

 

General Description ................................................................

2

Safety Precautions ..................................................................

2

Grounding Instructions ..........................................................

4

Operation .................................................................................

4

Purging and Priming..............................................................

4

Operating the Spray Gun ......................................................

5

Spraying...................................................................................

6

Spraying Technique ...............................................................

6

Practice..................................................................................

6

Cleanup ....................................................................................

6

Flushing the Unit ...................................................................

7

Maintenance ............................................................................

7

Daily Maintenance.................................................................

7

Maintaining the Fluid Section ................................................

7

Cleaning the Spray Tip..........................................................

9

Cleaning the Filter .................................................................

9

Replacing the Valve Spring Unit............................................

9

Accessories .............................................................................

9

Choosing the Correct Spray Gun Filter.................................

9

Troubleshooting ....................................................................

10

Limited Warranty ...................................................................

11

Français .................................................................................

12

Español ..................................................................................

22

Parts Listings ........................................................................

32

Main Assembly ....................................................................

32

Stand Assembly...................................................................

33

Suction Set Assembly..........................................................

33

Drive Assembly....................................................................

34

Transducer Assembly ..........................................................

35

Relay ...................................................................................

35

Pressure Control Assembly .................................................

36

Fluid Section Assembly ......................................................

37

Spray Gun ...........................................................................

38

Prime/Spray Valve Assembly...............................................

38

Filter Assembly (optional) ....................................................

39

Pressure Control Assembly Wiring Diagram .......................

40

General Description

 

This high performance piston pump is a precision power tool used for spraying many types of materials. Read and follow this instruction manual carefully for proper operating instructions, maintenance and safety information.

ON / OFF Switch

Pressure Control Knob

Return Tube

Suction Set

PRIME / SPRAY Knob

Safety Precautions

This manual contains information which must be read and understood before using the equipment. When you come to an area which has one of the following symbols, pay particular attention and make certain to heed the safeguard.

WARNING

This symbol indicates a potential hazard which may cause serious injury or loss of life. Important safety information will follow.

CAUTION

This symbol indicates a potential hazard to you or to the equipment. Important information that tells how to prevent damage to the equipment or how to avoid causes of minor injuries will follow.

NOTE: Notes give important information which should be given special attention.

WARNING

HAZARD: Injection injury - A high pressure stream produced by this equipment can pierce the skin and underlying tissues, leading to serious injury and possible amputation. See a physician immediately.

DO NOT TREAT AN INJECTION INJURY AS A SIMPLE CUT! Injection can lead to amputation. See a physician immediately.

The maximum operating range of the gun is 3000 PSI/207BAR fluid pressure.

PREVENTION:

•NEVER aim the gun at any part of the body.

•NEVER allow any part of the body to touch the fluid stream. DO NOT allow body to touch a leak in the fluid hose.

•NEVER put your hand in front of the gun. Gloves will not provide protection against an injection injury.

•ALWAYS lock the gun trigger, shut the pump off, and release all pressure before servicing, cleaning the tip or guard, changing tip, or leaving unattended. Pressure will not be released by turning off the motor. The PRIME/SPRAY knob must be turned to PRIME to relieve the pressure. Refer to the PRESSURE RELIEF PRESSURE described in the pump manual.

•ALWAYS keep the tip guard in place while spraying. The tip guard provides some protection but is mainly a warning device.

•ALWAYS remove the spray tip before flushing or cleaning the system.

•The paint hose can develop leaks from wear, kinking and abuse. A leak can inject material into the skin. Inspect the hose before each use.

•NEVER use a spray gun without a trigger lock and trigger guard in place and in good working order.

•All accessories must be rated at or above 3000 PSI/207 BAR. This includes spray tips, guns, extensions, and hose.

NOTE TO PHYSICIAN:

Injection into the skin is a traumatic injury. It is important to treat the injury as soon as possible. DO NOT delay treatment to research toxicity. Toxicity is a concern with some coatings injected directly into the blood stream. Consultation with a plastic surgeon or reconstructive hand surgeon may be advisable.

English

2

© SprayTECH. All rights reserved.